Free Sample: Fire technology essay on design buildings paper example for writing essay

Fire technology essay on design buildings - Essay Example

Other things that are key concepts and examples for identifying performance objectives, conducting risk analyses, analyses for the structural fire-resistant design of steel and other types of structures. One of the faculties in describing or specifying fire-resistant design for structures is that there are many different levels of classification in the design process with regard to the part (or parts) of the structure being considered, the fire exposure, and the structural analysis under fire conditions. Structural design for fire conditions has many layers and moving parts.

Designs can be done in a very simple way that is very cute and dry. Otherwise the design can be drawn with meticulous detail that goes down the smallest detail, like the specific band and color of the paint of the walls considering the amount of the important rabbles. It is essential for the designer to know what the purpose is and what assumptions are being made, no matter the level of complexity. An older resource that gave an overview of fire severity, fire resistance, and design of concrete, steel, and timber structures, was given by Buchanan (2001).

For any design, fire safety must be established first outside of regular building requirements. The overall design framework needs to set objectives for protection and safety of occupants, firefighters and property for recognized and potential hazards. Further deduction of the safety of the design for fire safety is often divided not active and passive fire protection. One component of the overall fire safety strategy would be the passive fire protection that induce fire resistance built into the building. Structural design for fire safety is a small piece to the puzzle of fire resistance.

Before making any design, it is essential to establish clear objectives and determine the severity of the design fire. Depending on the functional requirements for the particular building structural elements there can be also have fire resistance for either controlling the spread of fire or preventing structural collapse, perhaps even both of them. Most codes recognize that structural design for fire conditions is similar to structural design for normal temperature conditions. The most plausible loads at the time of a fire are much lower than the maximum design loads specified for normal temperature conditions.

This is especially true for materials that have been designed for proceeded load variables that include wind, snow, or earthquake, or for material members sized for deflection control or architectural reasons. For this reason, different design loads and load combinations are used. It is generally assumed that there is no explosion or other structural damage associated with the ire. Loads on members could be much higher if other members are removed or distressed so the limitations to testing and analysis is evident. The fire severity to be used for design depends on the design philosophy and legislative environment.

In a prescriptive code, the design fire severity is usually prescribed by the code with little or no room for negotiation. In a performance- based code, the design fire is usually recommended to be a complete burnout, or in some cases a shorter time of fire exposure that only allows for escape, rescue, or firefighting (Buchanan 2001). The equivalent time of a complete burnout is the time f exposure to the standard test fire that would result in an equivalent impact on the structure. Design of Steel Buildings Exposed to Fire.

Whole buildings or significant assemblies in whole buildings cannot be designed economically by the simple methods. It becomes necessary to use specialist computer programs for analysis of fire-exposed structures. Such programs will impose deformations on the structure and calculate the total strain in each member resulting from those deformations. The stress- related strain will be calculated, leading to origin of the internal forces in each ember for comparison with the applied loads. The advanced method is essential for any structures with structural excess.

The calculated fire resistance of an individual member can be very different from the resistance calculated considering the member to be part of a frame or a building. The fire performance of large-frame structures that are perceived to be better than the fire resistance of the individual structural elements (Moore and Lennox 1997). These observations have been supported by extensive computer analyses. The work of Frankness, Schlemiel, and Clot (1995) showed that an axial restraint from thermal expansion of the members should be included in the analysis of a frame building.

The behavior is different from that of the column and beam that were analyzed separately. A series of older studies off large full-scale fire tests was carried out between 1994 and 1996 in the Coordinating Laboratory of the Building Research Establishment in England. A full-size eight-story steel building was constructed with composite reinforced concrete slabs on exposed metal decking, supported on steel beams with no applied fire protection other than a suspended ceiling in some tests. While the steel columns were fire-protected.

A number of fire tests were carried out on parts of one floor of the building, resulting in steel beam temperatures up to 1000 degrees Celsius, leading to deflections up to 600 mm but no collapse and generally no integrity failures (Martin and Moore 1997). Fire resistance is a measure of the ability of a building element to resist a fire, usually the time for which the element can meet certain point during exposure to a standard fire resistance test. A building element is a structural member such as a beam or a column, a non-structural element such as a partition or door, or a combination such as a floor or load-bearing wall.

Individual materials do not possess fire resistance. Fire resistance is a property assigned to building elements that are constructed from a single material or a mixture of materials. A fire resistance rating is the fire resistance assigned to a building on the basis of a test or some other approval system. A fire with the potential to damage a building structure severely is a low- probability event to occur in comparison with other loads and structural actions that are common to structural engineering analysis and design.

Severe fires can lead to the buildings structural limit that resort into instability, or partial or total building lapse. The science of fire-resistant structural design is still at an early stage of development, and the structural engineering profession needs more customary engineering tools to attack the problems. Many building codes and standards such as CASE Standard 7-05 (CASE 2005) contain a requirement to provide general structural integrity, which is aimed at mitigating events that are outside the design envelope.

These provisions generally lack specifics and for some structural engineers they may find them difficult to apply. Most factors that determine building safety under fire conditions are uncertain in nature. In the presence of uncertainty, no building design can be engineered and constructed to be absolutely risk free from the effects of fire. Rather, the fire risk must be managed by a combination of measures involving architectural and structural engineering, building systems engineering, and occupant education.

With extensive provisions for fire safety, building codes are (and have been) key tools for managing fire risk in building construction in the interest of public safety, but the risks addressed by code provisions have been managed Judgmentally. Mitigation of risk from low-probability with high-consequence events, such as fire. Through the added dimension of structural analysis and design requires a different approach from the one taken in present building codes.