Chapter 9 + 10

Max has been hired to take over the administration of an existing network. All servers run Windows Server 2012 R2 and all hosts run Windows 8.
Configure the TCP/IP properties for the seven servers and all clients to receive IP addresses from the DHCP server.
The large block corporation has a network with three subnets. Network clients use Windows 8. All servers run Windows Server 2012 R2. A DNS server provides name resolution. Stacy has been asked to implement a DHCP solution for her network.

Configure each host to Obtain DNS server address automatically.

Configure each host to Obtain the IP address automatically.

You have a laptop that runs Windows 7. The laptop uses DHCP for IPv4 addressing information.
View the status for the network connection. Click the Details button.
Run the netsh command.
You have a single router with three subnets as follows: SubnetA = 50 hosts
SubnetA = 255.255.255.192
You need to design a network that supports 275 hosts. You want to place all hosts in a single broadcast domain, and want to make sure you do not waste IP addresses.
Place all hosts on the same subnet. Use a mask of 255.255.254.0 .
You have a single router with three subnets as follows: Subnet A = 60 hosts
A = Subnet address 172.22.19.64 with mask of 255.255.255.192
You have a server connected to two networks: Subnet A uses a 26-bit mask.
Change the IP address assigned to Wrk2.
You have a small network as shown in the image. You are unable to ping Wrk2 from Wrk1. What should you do to fix the problem?
Change the subnet mask on Wrk1
you manager the network that is shown in the graphic. You have just added Host B to the network.
IP address- 192.168.1.193
SubnetMask- 255.255.255.224
Default gateway- 192.168.1.221
DNS Server- 192.168.1.189
You manage a Windows 7 computer connected to a business network using switches and multiple subnets. You connect a workstation to the 192.168.1.0/24 subnet.
Edit the IPv4 properties and change the default gateway.
You have a small network with three subnets as shown in the graphic. IP addresses for each router interface are also indicated.
Wrk1_A = 192.168.111.62
Wrk5_C = 10.155.64.97
You manage a company network with multiple subnets. As part of a recent upgrade, you have upgraded all servers to Windows Server 2012 R2. Client systems run Windows 8.
FC00
FD00
You manage a company network with multiple subnets. As part of a recent upgrade, you have upgraded all servers to Windows Server 2012 R2. Client systems currently run Windows 7 professional, with a few newer systems running Windows 8.
In the network connection properties on each client, client select Obtain an IPv6 address automatically.
In the network connection properties on each client, select Obtain DNS server address automatically.
You manage a small private network with three subnets as shown in the image. The App1 server on SubnetC runs only IPv6 and because of your company policy, it cannot be congigured with an IPv4 address.
Configure Rtr1 as an ISATAP router.
You manage two small remote networks: one in portland and on in seattle. Both sites are connected to the Internet through a single Windows Server 2012 R2 server using NAT.
Manually configured tunneling
6to4 tunneling
You manage a small private network with two subnets as shown in the image. Both Wrk1 and Wrk2 run Windows 8 and have been configured with IPv6 addresses.
On the DNS server for the network, create an A record named ISATAP that point to Srv3
You manage the small network that is connected to the Internet as shown in the graphic. You add Host A to the network.
IP address- 10.0.0.97
Subnet Mask- 255.255.255.240
Default Gateway- 10.0.0.110
You have a laptop that runs Windows 8. The laptop uses IPv6. The network connection is configured to obtain an IPv6 address automatically.
Run the netsh command.
View the status for the network connection. Click the details button.
You have a computer that runs Windows 7. Your company has started the migration of IPv6 on your network. Your network administration tells you that the network is using stateless autoconfiguration.
Edit the itnernet Protocol Version 6 (TCP/IPv6) properties for the network adapter. Select Obtain an IPv6 address automatically and use the following DNS server addresses.
You manage a network with all Windows 7 clients. As part of you IPv6 migration strategy, you have implemented ISATAP on your netowrk.
Ping the address beginning with FE80:
You manage a network with all Windows 7 clients. As part of your IPv6 migration strategy, you ahve implemented Teredo on your computer.
Ping address beginning with 2001:
You are the assistant systems manager for your company’s network. There are 600 workstations running windows 7 and windows 8.
Delete all of the scopes and start over.
You are the administrator of what will become a large Windows Server 2012 network using the TCP/IP protocol. Currently the network consists of three Windows Server 2012 R2 computers, 25 windows 7 professional workstations and 25 windows 8 workstations as shown in the diagram.
Configure each workstation to use DHCP. Install a DHCP server and configure a single scope.
Alberto administers a single DHCP server for his network of three subnets.
Configure scope options for the server to deliver the DNS server value. Configure scope options for each scope to deliver the default gateway value.
You are installing DHCP in four subnets. Three of the subnets have Windows 7 desktop computers, and the fourth subnet has only Windows 7 latptop computers.
Set up one scope for each subnet, and set the lease period as a part of each scope’s configuration.
Mark is the system administrator for a network with a single Active Directory domain.
Ask a member of the Enterprise Admins group to authorize the server.
You are the administrator for a large network. You have one location serving several thousand users. At present, your company has just finished an upgrade so, all 100 servers are running windows server 2012 R2.
Manually configure the IP address on the Web server. Create an exclusion on the DHCP server.
Configure the Web server to use DHCP. Create a reservation on the DHCP server.
Serey is the network administrator for a single domain network with 15 servers running Windows Server 2012 R2, 200 Windows 8 clients, and 10 UNIX workstations.
Create a reservation for each UNIX workstation. Configure the workstations to receive IP addresses from DHCP.
You are the manager for the westsim.com domain. The network has a wingle subnet with five servers. all running windows server 2012 R2. The 100 Client computers all run Windows 8.
On the DHCP server, delete the exclusion range.
Nadine is the systems administrator for a network with a single subnet.
Authorize Srv-11
You are the administrator of a network with a single subnet. A single windows server 2012 R2 server on Subnet1 is the domain controller, DNS server, and DHCP server.
Enable BootP forwarding on the router connecting Subnet1 to Subnet2
On Srv2, add teh Remote Access role with routing. In routing and remote access, configure the relay agent protocol.
The image depicts the network layout of NorthSim corporation. Currently, the network uses static IP addressing.
Configure SRV2 as a relay agent
The network you manage has 200 workstations split into two network segments. Each segment has two servers, each running Windows Server 2012 R2.
In Routing and Remote access, change the IP address configured for the Relay agent protocol.
You are the network administrator of a network with 90 work stations on a single subnet.
On both servers, set the scope range to 194.172.64.10 to 194.172.64.254 . On SRV1, exclude addresses 194.172.64.206 to 192.172.64.254.
You are the network administrator for a single domain network with a single subnet. Server Prod2 is configured to provide DHCP services for the subnet.
On Prod2,exclude addresses 192.168.1.151 to 192.168.1.250.
On Prod4, create a scope with address range 192.168.1.51 to 192.168.1.250.
On Prod4, exclude addresses 192.168.1.51 to 192.168.1.150
You are the network administrator for a single domain network with a single subnet. Server Prod2 is configured to provide DHCP services for the subnet.
Configure an exclusion for addresses 192.168.1.51 to 192.168.1.210.
Configure a scope with address range 192.168.1.51 to 192.168.1.250 .
You manage the westsim.com domain. All servers run the Windows Server 2012 R2 and all workstations run Windows 8. Salesmen issued laptops that the use to connect to the local network as well as dial in when they are on the road .
On each laptop, configure an alternate IP configuration.
You have just received a new laptop at work that you will use on your company network and at home. The company network uses dynamic addressing, while your home network uses static addressing.
Configure the alternate TCP/IP configuration.
You are the assistant systems manager of your small company’s network, which includes about 2000 Windows 7 and Windows 8 workstations and five servers all running Windows Server 2012 R2. All workstations receive their IP assignments from a DHCP server.
Reboot the DHCP server
You are the server administrator for the network shown in the first image. SRV2 is a domain controller that hosts an Active Directory integrated zone for the network. SRV1 is an application server.
Enable BOOTP forwarding on the router.
You manage a Windows 7 computer connected business network using switches and multiple subnets. One day you find that the computer is unable to connect to the Internet,
Verify that the DHCP server is up and funtional.
You ahve a computer that runs Windows 7 connected to a domain network. One day you find that your computer cannot connect to any network resources.
Run the Ipconfig / release and Ipconfig / renew commands.