Test Out section 5.4

What information does the next hop entry in a routing table identify?
The first router in the path to the destination network.

A router is connected to network 192.168.1.0/24 and network 192.168.2.0/24.The router is configured to use RIP and has learned of networks 192.168.3.0/24 and 192.168.4.0/24.There is no default route configured on the router.

We Will Write A Custom Essay Sample On
ANY TOPIC SPECIFICALLY
FOR YOU

For Only $13.90/page


order now

The router receives a packet addressed to network 10.1.0.0/16. What will the router do with the packet?

Drop the packet.
Under which of the following circumstances might you implement GBP on your company network and share routes with Internet routers?
If the network is connected to the Internet using multiple ISPs.
Which of the following routing protocols is classified as a balanced hybrid of routing protocol.
EIGRP
Which of the following routing protocols is used by routers on the internet or learning and sharing routes?
BGP
Which of the following protocols has a limit of 15 hops between any two networks?
RIP
What is the main difference between RIP and RIPv2?
RIP is a classful protocol,while RIPv2 is a classless protocol.
Which of the following is a characteristic of static routing when compared to dynamic routing?
All routes must be manually updated on the router.

You have a network configured to use the OSPF routing protocol.

Which of the following describes the state when all OSPF routers have learned about all other routes in the network?

Convergence
Which of the following routing protocols divides the network into areas,with all networks required to have an area 0 (area 0 identifying the backbone areas)?
OSPF
Which of the following best describes OSPF
OSPF is a classless link-state routing protocol.
Which of the following statements about RIP is true?
RIP uses hop counts as the cost metric.

You manage a server that uses an IP address of 192.168.255.188 with a mask of 255.255.0.0.

Which of the following describes the address type?

Classless
Which of the following routing protocols are classifies as link state routing protocols? (Select two.)
OSPF
IS-IS

A router is connected to network 192.168.1.0/24 and network 192.168.2.0/24.The router is configured to use RIP and has learned of networks 192.168.3.0/24 and 192.168.4.0/24.

The next hop router for network 192.168.3.0 has changed.You need to make the change with the least amount of effort possible.What should you do?

Wait for convergence to take place.

You have a router configured to share routing information using RIP.In addition,you have a single static router that identifies a default route for all other networks.

The next hop router for the default route has changed.You need to make the change with the least amount of effort possible.What should you do?

Manually reconfigure the default route to point to the new next hop router.

You have a private network connected to the Internet.Your routers will not share routing information about your private network with Internet routers.

Which of the following best describes the type of routing protocol you would use?

IGP

A router is connected to network 192.168.1.0/24 and network 192.168.2.0/24. The router is configured to use RIP and has learned of networks 192.168.3.0/24 and 192.168.4.0/24.The router is also configured with a static router of 0.0.0.0 with a mask of 0.0.0.0.

The router receives a packet addressed to network 10.1.0.0/16.What will the router do with the packet?

Forward the packet to the next hop router specified by the route to network 0.0.0.0.
Which of the following terms are often synonymous with or made possible with CIDR? (Select two.)
Classless
VLSM
What are the main differences between the OSPF and IS-IS routing protocols?
OSPF requires an area, while IS-IS does not.